The idea of installing the motion detector is that it either turns the HDMI signal on or off. IF the motion detector does not detect any movement for 9 seconds (value that can be changed as required), it switches of the HDMI Signal. As soon as movement is registered again, it switches the signal on again. If movement is also registered during 60 seconds, the timer is reset to zero.. The pir sensor connected to raspberry pi with female-female jumper cable. VCC to Pin 2 GND to Pin 6 OUT to Pin 12 And now the motion detector should switch […]
Development / PHP
PHPStorm – Symfony log highlighting
To do, go into Settings -> Editor -> Log Highlighting (Ideolog) Add new Log Format with the following config: special thanks to : https://locastic.com/blog/a-quick-way-to-browse-symfony-logs-with-phpstorm/ Views: 74
Uncategorized
Magic Mirror – Update #2
For First Part: Magic Mirror – A another Smart Mirror Hobby Project Original Raspberry PI Adapter modified One Plug&Play Cable with Flat Cable and Plug HDMI and Power Supply Cable left enough for future extension PIR Sensor Preparation Speakers on sides cliped. Views: 38
Development / PHP
PHPStan Config for Standalone Chameleon Project
Install Standard phpstan.neon file for standalone chameleon project. Run: Views: 38
Development / DIY / Javascript / NodeJS / Raspberry PI 3
smartmrk – v0.2.1 Updates – 28.02.2021
Modul Extension Prototyp Clean Timer Modul – Screencast Video Download & Source https://github.com/kzorluoglu/smartmrk Views: 51